RE: [CAD_CAM_EDM_DRO] 1-1/2-8 Threaded spindle on a Lathe

You can buy a 1-1/2-8 back plate for $40 from enco part number
274--0117. or try www.use-enco.com
Dan

-----Original Message-----
From: cadman@... [mailto:cadman@...]
Sent: Thursday, September 27, 2001 11:53 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] 1-1/2-8 Threaded spindle on a Lathe

I thought I would ask this question to this group because there are
so many machinists here. I have a small bench lathe but it has a
metric spindle screw on it (M39x4) Not very many chuck attachments
can be found for it. I want to make a conversion adapter that will
turn it into a spindle that will take 1-1/2-8 threaded chucks and
collet chucks. If anyone knows the dimensions for a standard 1-1/2-8
spindle could you supply the dimensions to the sketch below? On my
metric spindle there is a flange, so I assume that there is one on
the standard inch flange. If not let me know.

Thanks

CADMAN


|<---->-----A Flange Length
| :
| :
|-----''''''''''''''''/\
| | |
| |_/\/\/\/\ |
| | | |
| | | |
| | 1-1/2-8 | B Flange Diameter
| | Thread | |
| |_ | |
| | \/\/\/\/ |
| | : |
|-----..........:.....\/
| : :
| : :
| : :
<-------->-----C Thread
Length



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/