Re: [CAD_CAM_EDM_DRO] Re: Need inspiration? Check these photos on e-bay.
Posted by
ptengin@a...
on 2001-09-28 00:22:59 UTC
In a message dated 9/27/01 1:38:05 AM Hawaiian Standard Time,
thomasm923@... writes:
<< My one critism is that the rails are a bit
too narrow. The unit that we bought is anodized, but otherwise it
looks to be the same. >>
Gents,
Many years ago, I used to abuse an Unimat SL. Got those same small round
rail type ways as the pictured mill. I found it very hard to do very precise
work. They could be flexed just by the cranking action on the X axis hand
wheel. If you program for very light cuts, keep your cutters sharp and work
light materials, it can be made to work. Boy, imagine this machine with THK
style linear bearings.
Peter
THRD, Inc.
thomasm923@... writes:
<< My one critism is that the rails are a bit
too narrow. The unit that we bought is anodized, but otherwise it
looks to be the same. >>
Gents,
Many years ago, I used to abuse an Unimat SL. Got those same small round
rail type ways as the pictured mill. I found it very hard to do very precise
work. They could be flexed just by the cranking action on the X axis hand
wheel. If you program for very light cuts, keep your cutters sharp and work
light materials, it can be made to work. Boy, imagine this machine with THK
style linear bearings.
Peter
THRD, Inc.
Discussion Thread
Donald Brock
2001-09-26 08:25:14 UTC
Need inspiration? Check these photos on e-bay.
Randy Gordon-Gilmore
2001-09-26 11:11:39 UTC
Re: [CAD_CAM_EDM_DRO] Need inspiration? Check these photos on e-bay.
cncdxf@a...
2001-09-26 11:27:36 UTC
Re: Need inspiration? Check these photos on e-bay.
Alan Marconett KM6VV
2001-09-26 11:36:24 UTC
Need inspiration? Check these photos on e-bay.
Tom Murray
2001-09-27 04:35:31 UTC
Re: Need inspiration? Check these photos on e-bay.
ptengin@a...
2001-09-28 00:22:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Need inspiration? Check these photos on e-bay.