CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] gecko servo drives

Posted by Tim
on 2001-10-19 12:11:37 UTC
The Gecko G210 is a microstepping stepper drive that can be set to move
1, 2, 5, or 10 microsteps per input step. It does not use encoders.

The Gecko G320 is a servo drive that is run from step and direction
software. It requires a 2 channel 5V quadrature encoder on the motor.

Both are driven with step and direction style software such as EMC,
CNCPro, Master5, etc.

Tim
[Denver, CO]

> -----Original Message-----
>
>
> hi
> how is Gecko210/320 is working?
> how type of serevo is using?
> how type of encoder is using?
> what software is using to run it?
> shabbir
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>

Discussion Thread

whollid1@m... 2001-10-18 15:30:27 UTC gecko servo drives Tim 2001-10-18 16:15:39 UTC RE: [CAD_CAM_EDM_DRO] gecko servo drives M. SHABBIR MOGHUL 2001-10-19 10:30:58 UTC Re: [CAD_CAM_EDM_DRO] gecko servo drives Tim 2001-10-19 12:11:37 UTC RE: [CAD_CAM_EDM_DRO] gecko servo drives