RE: [CAD_CAM_EDM_DRO] gecko servo drives

You pretty much have it. Remember that an encoder tick in this context
is = 1/4 of a line meaning that a 250 line encoder disk will require
1000 ticks to make a full revolution. The only other difference is that
the G340 can use ground as the common to the computer where as the G320
needs a + 5V common.

Tim
[Denver, CO]

> -----Original Message-----
>
>
> Just a quick question about 3xx series drives. Am I correct that the
> 320 will move the motor 1 encoder tick for each pulse of step whereas
> the 340 will move either1/2/5/10 ticks per pulse. or is there more to
> it than that
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/