Re: Small Router bits
Posted by
mdickey@b...
on 2001-10-23 05:04:29 UTC
--- In CAD_CAM_EDM_DRO@y..., jetkopter@a... wrote:
bit in my small CNC router with great results. Dunno if they have
5/64 though. One thing I discovered: if you're doing precision work,
run a test cut in the various materials you're going to be cutting
and measure the actual kerf width. The bits I bought measured .055"
dia. instead of .0625" but actually cut about .060". Vibration??
HTH
Milton Dickey
> Does anyone have a source for 5\64 or 1.5 mm router bits?Hmmm, try eagle-america.com I use their 1/16" 2 flute solid carbide
bit in my small CNC router with great results. Dunno if they have
5/64 though. One thing I discovered: if you're doing precision work,
run a test cut in the various materials you're going to be cutting
and measure the actual kerf width. The bits I bought measured .055"
dia. instead of .0625" but actually cut about .060". Vibration??
HTH
Milton Dickey
Discussion Thread
jetkopter@a...
2001-10-22 21:13:16 UTC
Small Router bits
mdickey@b...
2001-10-23 05:04:29 UTC
Re: Small Router bits
Smoke
2001-10-23 07:25:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: Small Router bits