Re: [CAD_CAM_EDM_DRO] Please help!!! I have run away servos on X and Y
Posted by
Eric Keller
on 2001-10-24 05:52:48 UTC
Subject: [CAD_CAM_EDM_DRO] Please help!!! I have run away servos on X and Y
Jim Montgomery said:
It seems that the most likely place is the motor voltage, but depending on
how they did the control it could be tach voltage or position.
Eric
Jim Montgomery said:
>In general, runaway servos would suggest a polarity reversal somewhere.
> Any help on why I might get run aways or any info on what my servo
> amps may like as far as voltage inputs and what pins would be great.
>
It seems that the most likely place is the motor voltage, but depending on
how they did the control it could be tach voltage or position.
Eric
Discussion Thread
Eric Keller
2001-10-24 05:52:48 UTC
Re: [CAD_CAM_EDM_DRO] Please help!!! I have run away servos on X and Y
Jim Montgomery
2001-10-25 04:49:25 UTC
Re: Please help!!! I have run away servos on X and Y
Eric Keller
2001-10-25 04:53:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Please help!!! I have run away servos on X and Y
Jim Montgomery
2001-10-25 05:29:03 UTC
Re: Please help!!! I have run away servos on X and Y
vrsculptor@h...
2001-10-25 06:10:52 UTC
Re: Please help!!! I have run away servos on X and Y
Jon Elson
2001-10-25 11:36:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Please help!!! I have run away servos on X and Y
Jim Montgomery
2001-10-31 02:53:46 UTC
Re: Please help!!! I have run away servos on X and Y
Jim Montgomery
2001-10-31 03:25:24 UTC
Re: Please help!!! I have run away servos on X and Y