Re: [CAD_CAM_EDM_DRO] Re: DESPERATE HELP NEEDED ON EXCELLON LASER PLOTTER

Is the laser out of focus or have you got dust/dirt on the mirrors? Dust and
dirt will also give a furry outline.

Les

> ok can I rephrase the Q?....and thanks to all that replied erm some
> replied about milling lol
> Anyhoo the laser has 10 spinning mirrors which I believe to be the
> cause of the blur but even after readjusting these, the laser
> definition in the emulsion is still furry.
>
> The centre of the line is well defined but the edge is blurry. The
> platen is flat and the mirror spins at 1200 rpm although this two is
> variable....I have no manual to help me
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>