Re: [CAD_CAM_EDM_DRO] EMC buffer question

Frank,

Not sure what the problem is but if you want to send me the file
off list, I will try it on my machine and see what happens. I have run
files with thousands of lines and not had that problem.

Bill
wscalione@...

> When I run a file everything is smooth up to line 150 of gcode then
> each line after that is run in a start/stop fashion. What do I set to
> keep the buffer full. I'm running a Celeron 500 with 128 meg.
>
> 2048 steps per inch. Avg. speed 45 ipm
>
> Frank
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>