CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Wood for milling

Posted by Smoke
on 2001-11-14 08:14:36 UTC
You might also want to try a lot of knife making supply places. They all
have exotic woods. You can also get woods which have been epoxy impregnated
(know as stabilized wood) which will have much less tendency to crack or
break off as the cutter moves to the edge of the wood.

Smoke
----- Original Message -----
From: "Carol & Jerry Jankura" <jerry.jankura@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, November 14, 2001 6:28 AM
Subject: RE: [CAD_CAM_EDM_DRO] Wood for milling


> Rob:
>
> You might want to try Berea Hardwoods
>
> 440-234-7949
>
> -- Carol & Jerry Jankura
> Strongsville, Ohio
> So many toys, So little time....
>
> | Does anyone know where I can get small pieces of various wood (dark
> | burlwood, mahogany, etc.) for milling?
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Rob 2001-11-13 22:13:06 UTC Wood for milling Tim Goldstein 2001-11-13 22:29:21 UTC RE: [CAD_CAM_EDM_DRO] Wood for milling ppump11578@a... 2001-11-14 01:45:25 UTC Re: [CAD_CAM_EDM_DRO] Wood for milling jesse 2001-11-14 04:24:50 UTC Re: [CAD_CAM_EDM_DRO] Wood for milling Carol & Jerry Jankura 2001-11-14 05:29:54 UTC RE: [CAD_CAM_EDM_DRO] Wood for milling Carol & Jerry Jankura 2001-11-14 05:31:07 UTC RE: [CAD_CAM_EDM_DRO] Wood for milling Smoke 2001-11-14 08:03:39 UTC Re: [CAD_CAM_EDM_DRO] Wood for milling David Goodfellow 2001-11-14 08:14:33 UTC Re: [CAD_CAM_EDM_DRO] Wood for milling Smoke 2001-11-14 08:14:36 UTC Re: [CAD_CAM_EDM_DRO] Wood for milling ballendo@y... 2001-11-14 15:22:14 UTC Re: Wood for milling JanRwl@A... 2001-11-14 16:40:46 UTC Re: [CAD_CAM_EDM_DRO] Wood for milling Smoke 2001-11-14 16:46:49 UTC Re: [CAD_CAM_EDM_DRO] Wood for milling