RE: [CAD_CAM_EDM_DRO] EMC Problems

One of the list members had it running on Linux using Win4Lin. Don't know
what the 32 bit version would do.

Tim
[Denver, CO]

> -----Original Message-----
>
> Will Vector run on Linux?
>
>
> On Sat Nov 17 20:32:46 2001, Tim Goldstein, timg@... wrote:
>
> >Chris,
> >
> >So what was it that was causing the problem??
> >
> >When you say "(Any software I can use to output the code needed
> to make this
> >run?" are you meaning the g-code for a part program? If so you
> can use ACE
> >Converter from Yeager Automation or I am told that you can also
> use the demo
> >of Flashcut to create G-code from a .dxf file. Both of these are free. If
> >you want a CAD/CAM program I would suggest you take a look at
> Vector. Fred
> >has some pretty good deals for us list members.
> >
> >Tim
> >[Denver, CO]
> >
> >> -----Original Message-----
> >>
> >> Hi all,
> >> Thanks for all your help on my last post - the system seems to be
> >> wired and working. Used TurboCNC, and it works great. (Any software I
> >> can use to output the code needed to make this run?)
> >> What I'm trying to do now is install LinuxEMC; I formated my HD, and
> >> have been trying to install the Brain Dead install. Everytime I boot
> >> from the CD, I get a 'signal 11' errors.
> >> Any help?
> >> Thanks,
> >> -Chris Clough
> >> Xtech Engineering
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>