CAD CAM EDM DRO - Yahoo Group Archive

Re: EMC I/O Config

Posted by shymu@b...
on 2001-11-18 17:32:42 UTC
Thanks Ray

--- In CAD_CAM_EDM_DRO@y..., Ray <rehenry@u...> wrote:
>
>    From: shymu@b...
>
> >Is there a way to config the printer port so I can turn on or off
> >spindle and vac motors.
>
> This is one of those tasks where "seems to me's" don't apply very
well. I
> proposed a similar sort of thing to the emc list a while back and it
turns
> out that the sigs are written to the port as one chunk rather than
as a
> descrete set of pin-directed bits.
> Short answer for now, add a $9.00 ISA parport card and use
bridgeportio or
> if you want to program the card for more specialized tasks use tkio.
>
> HTH
>
> Ray

Discussion Thread

shymu@b... 2001-11-17 16:50:39 UTC EMC I/O Config JanRwl@A... 2001-11-17 19:11:18 UTC Re: [CAD_CAM_EDM_DRO] EMC I/O Config JanRwl@A... 2001-11-17 19:20:54 UTC Re: [CAD_CAM_EDM_DRO] EMC I/O Config Alan Marconett KM6VV 2001-11-17 19:32:28 UTC Re: [CAD_CAM_EDM_DRO] EMC I/O Config Ray 2001-11-18 15:07:05 UTC Re: EMC I/O Config shymu@b... 2001-11-18 17:32:42 UTC Re: EMC I/O Config