Re: [CAD_CAM_EDM_DRO] Re: Mostly on topic or at least getting there

> Anyone knows of any affordable PC base scope?

There are several programs free on the net which will let you use a PC as an
oscilloscope - they take their input through the soundcard. They are mainly
aimed at audio applications but i don't see why they wouldn't work for other
low frequency jobs.

Ian
--
Ian W. Wright
Sheffield UK
www.iw63.freeserve.co.uk

----- Original Message -----
From: <cadcamcenter@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: 19 November 2001 18:31
Subject: [CAD_CAM_EDM_DRO] Re: Mostly on topic or at least getting there


> > I just bought a Tek 475 scope for working on a servo setup I'm
> building
>
> The PC monitor is not very much different from the tube for an
> oscilloscope, so setting up a PC as a scope should be very feasible.
> Anyone knows of any affordable PC base scope?
>
> Peter
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>