CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: RS274 vs RS274-NIST

Posted by Jon Elson
on 2001-11-24 21:37:44 UTC
Carol & Jerry Jankura wrote:

> Alan:
>
> I found my release 3 publication on the web at:
>
> http://www.linuxcnc.org/handbook/RS274NGC_3/RS274NGC_3TOC.html
>
> but it doesn't have any mention of the G7x codes.
>
> For that information, try looking at:
>
> http://www.public.iastate.edu/~cnc101/
>
> Both sites have a fairly large description of the various standard :} Codes.
> Hope this helps.

This last link is very specific to some controller. G76 - G79 are
formally UNASSIGNED in the RS-274D specification, so you
can't expect any coordination on these codes between manufacturers.

Jon

Discussion Thread

Carol & Jerry Jankura 2001-11-23 16:15:21 UTC RS274 vs RS274-NIST Fred Smith 2001-11-23 17:05:07 UTC Re: RS274 vs RS274-NIST Alan Marconett KM6VV 2001-11-23 17:24:46 UTC Re: [CAD_CAM_EDM_DRO] RS274 vs RS274-NIST Carol & Jerry Jankura 2001-11-23 18:49:04 UTC RE: [CAD_CAM_EDM_DRO] Re: RS274 vs RS274-NIST Jon Elson 2001-11-23 20:24:09 UTC Re: [CAD_CAM_EDM_DRO] RS274 vs RS274-NIST dkowalcz@d... 2001-11-23 22:00:19 UTC Re: RS274 vs RS274-NIST Alan Marconett KM6VV 2001-11-24 11:14:43 UTC Re: RS274 vs RS274-NIST Carol & Jerry Jankura 2001-11-24 13:16:01 UTC RE: [CAD_CAM_EDM_DRO] Re: RS274 vs RS274-NIST Alan Marconett KM6VV 2001-11-24 14:11:58 UTC Re: RS274 vs RS274-NIST Carol & Jerry Jankura 2001-11-24 16:43:09 UTC RE: [CAD_CAM_EDM_DRO] Re: RS274 vs RS274-NIST Alan Marconett KM6VV 2001-11-24 17:48:01 UTC Re: RS274 vs RS274-NIST Jon Elson 2001-11-24 21:37:44 UTC Re: [CAD_CAM_EDM_DRO] Re: RS274 vs RS274-NIST Carol & Jerry Jankura 2001-11-25 05:26:18 UTC RE: [CAD_CAM_EDM_DRO] Re: RS274 vs RS274-NIST Alan Marconett KM6VV 2001-11-25 13:03:28 UTC Re: RS274 vs RS274-NIST Jon Elson 2001-11-25 17:43:54 UTC Re: [CAD_CAM_EDM_DRO] Re: RS274 vs RS274-NIST