Re: [CAD_CAM_EDM_DRO] edge lighting plexi
Posted by
Randy Gordon-Gilmore
on 2001-11-27 22:19:36 UTC
At 06:00 AM 11/28/01 +0000, Jon Elson wrote:
more like etching/frosting the surface than a coating. You want to "leak"
light out of the surface. Painting the surface will still leave the smooth
acrylic surface (totally reflecting at any decent incidence angle)
underneath.
One display we're using has an array of very shallow holes (like just the
drill point of an .050" drill or so) in about an 1/8" acrylic sheet, and a
thin translucent plastic sheet placed over the acrylic as a diffuser. It's
edge-lit with a very small fluorescent tube.
Best regards,
Randy
Randy Gordon-Gilmore ,----.___________ ______________ _________________
ProtoTrains // = = === == || == == == = || == == == = == =|
Rio Vista, CA, USA /-O==O------------o==o------------o==o-----------o==o-'
zephyrus@... http://www.rickadee.net/~zephyrus
>something that looks like standard Plexiglas and paint it translucentJon, from what I've seen in backlighted displays I've disassembled, it's
>white, and then paint over that with black paint, masking it where they
more like etching/frosting the surface than a coating. You want to "leak"
light out of the surface. Painting the surface will still leave the smooth
acrylic surface (totally reflecting at any decent incidence angle)
underneath.
One display we're using has an array of very shallow holes (like just the
drill point of an .050" drill or so) in about an 1/8" acrylic sheet, and a
thin translucent plastic sheet placed over the acrylic as a diffuser. It's
edge-lit with a very small fluorescent tube.
Best regards,
Randy
Randy Gordon-Gilmore ,----.___________ ______________ _________________
ProtoTrains // = = === == || == == == = || == == == = == =|
Rio Vista, CA, USA /-O==O------------o==o------------o==o-----------o==o-'
zephyrus@... http://www.rickadee.net/~zephyrus
Discussion Thread
carlcnc@y...
2001-11-27 18:51:07 UTC
edge lighting plexi
Rich D.
2001-11-27 19:16:34 UTC
Re: [CAD_CAM_EDM_DRO] edge lighting plexi
Jon Elson
2001-11-27 21:56:25 UTC
Re: [CAD_CAM_EDM_DRO] edge lighting plexi
carlcnc@y...
2001-11-27 22:08:34 UTC
Re: edge lighting plexi
Randy Gordon-Gilmore
2001-11-27 22:19:36 UTC
Re: [CAD_CAM_EDM_DRO] edge lighting plexi
Brian Pitt
2001-11-27 22:39:15 UTC
Re: [CAD_CAM_EDM_DRO] edge lighting plexi
Jon Elson
2001-11-28 10:28:34 UTC
Re: [CAD_CAM_EDM_DRO] edge lighting plexi