Re: [CAD_CAM_EDM_DRO] BobCad??

I'm a Newbie with BobCad, Spud, and have had some problems. First, when
converting to G-codes, do not insert "separators" (blank lines) in the code.
The last command prior to the blank line goes bananas. (Probably this is
not a BobCad problem, but rather G-code interpretation. The other problem I
have had (so far) is that even when I stipulate the maximum cut per pass,
BobCad insists on going for the final depth on the first pass. I have had
to cut and paste on the G-code file to get there with multiple passes.
Anything in particular you want to know? Probably I don't have the answer,
but I could at least add it to my list of questions<g>

Dave Goodfellow
Northridge, CA
"No problem too small to baffle this expert"

----- Original Message -----
From: <spudwackr@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, November 29, 2001 5:44 PM
Subject: [CAD_CAM_EDM_DRO] BobCad??


> Does anyone use BOBCAD, or know of any forums or list. Just starting
> to us it,and need some tips. Thanks,Spud
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>