Re: Still not started

In a message dated 5/21/99 3:36:21 AM Hawaiian Standard Time,
dmauch@... writes:

<< I used 300 oz in stepper on my mill drill with a 2/1 ratio timing belts and
pulleys. >>
Dan,
Just how fast does this setup go? I tried 300's on a FB-2 direct drive
with poor results. I figured it was a smaller machine. I will be installing
the 2:1 reduction in a week or so... I'm fighting the backlash also. The z
axis is worst on climbing to home. I'm gonna try nitrogen springs from a
hatch back car. Peter