Re: Position Readout Question and Introduction
Posted by
George Potter
on 1999-05-21 21:55:38 UTC
Jon Elson wrote:
anyone has info on the outputs of the scales, that would be helpful, but
if not, I'll digout the scope, etc. and find out what comes out. (In one
of my past lives I was paid to do reverse engineering)
The Digital Readout Unit itself has a cutout on the back panel for a DB25
connector, and is labelled aux out (or something like that), but I haven't ever
opened it up, to see what is missing (or empty holes on the PCB, not stuffed).
Regards,
George Potter
>Using the "glass scales" was actually what I was thinking of (mitutoyo). If
> Now, if you mean just to use the linear encoders, that's another story.
>
> Jon
>
anyone has info on the outputs of the scales, that would be helpful, but
if not, I'll digout the scope, etc. and find out what comes out. (In one
of my past lives I was paid to do reverse engineering)
The Digital Readout Unit itself has a cutout on the back panel for a DB25
connector, and is labelled aux out (or something like that), but I haven't ever
opened it up, to see what is missing (or empty holes on the PCB, not stuffed).
Regards,
George Potter
Discussion Thread
George Potter
1999-05-20 17:11:33 UTC
Re: Position Readout Question and Introduction
Matt Shaver
1999-05-20 21:14:02 UTC
Re: Position Readout Question and Introduction
mike
1999-05-20 21:24:22 UTC
Re: Position Readout Question and Introduction
Jon Elson
1999-05-20 23:36:49 UTC
Re: Position Readout Question and Introduction
PTENGIN@x...
1999-05-21 03:01:21 UTC
Re: Position Readout Question and Introduction
George Potter
1999-05-21 21:55:38 UTC
Re: Position Readout Question and Introduction