Re: Help, I dropped a servo motor and the magnets seperated.......

Thanks,

the magnets did not break, they just became seperated from the case.
I'll try the JB-Weld, I have a new package of it from another project
over the weekend.

Mike

--- In CAD_CAM_EDM_DRO@y..., "Ed Koffeman" <edk@k...> wrote:
> Yes. JBWeld works well. In general, epoxy works for glueing
magnets.
>
> If it won't stay in place by its own magnetism, "C" clamp it with
some wood or something else soft protecting the magnet.
>
> If you don't know which magnet went where (look for small pices
left attached) then if you mix them up the motor's polarity might be
> reversed and you'll need to flip the wiring as well (watch out
because it won't close the feedback loop when reversed!).
>
> Ed Koffeman