Re: [CAD_CAM_EDM_DRO] AT Tower Power Supply switch wiring

Hi, one side of the switch is connected to white and blue, the other side is
brown to black. so if you connect them this way it will be on all the time
or you may use the switch. cul brian f.

----- Original Message -----
From: Gary Wheeler <g.wheeler@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, December 30, 2001 6:35 PM
Subject: [CAD_CAM_EDM_DRO] AT Tower Power Supply switch wiring


> Help! Am trying to use an old computer power supply to run a CNC
> controller. Benchtop dremel machine, Kleinbauer.com NCF2002. Simple
unit,
> will be using aluminum storefront window frame, but am having trouble
> powering up the power supply. Mr. Kleinbauer hasn't seen one like it.
>
> Would like to use an old AT tower-type power supply, 230 watt DC. But,
> can't figure out which wires were connected to turn on the supply. It was
> from a now obsolete full height tower case which had a line voltage
(DPDT?)
> switch on the front of the chassis. It has no power switch on the supply
> itself but instead uses 5 wires apparently of line voltage size with
> individual spade terminals. Which would connect to front of the chassis.
> One wire is a ground (green), another hot (white). Two are apparently
> reduced line voltage, about 100 VAC (blue, brown). One wire is apparently
> the neutral (black).
>
> Anyone have any ideas? B-{)}
>
> thanks,
>
> Gary
>
> Gary M. Wheeler, AIA, architect
> Modesto, California
> Home page: http://g.wheeler.home.att.net
> Ebay: g.wheeler@...
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>