RE: [CAD_CAM_EDM_DRO]
Posted by
H. Bennink
on 2002-01-04 14:30:37 UTC
AMD Duron 800Mhz
Abit motherboard KT7-raid
Windows XP
256 mb ram
370322119 in the Freqency in Hertz box
1243396 in the WatchDog count box
Henk
-----Oorspronkelijk bericht-----
Van: Art Fenerty [mailto:fenerty@...]
Verzonden: vrijdag 4 januari 2002 21:44
Aan: CAD_CAM_EDM_DRO@yahoogroups.com
Onderwerp: [CAD_CAM_EDM_DRO]
Hi All:
For those of you who like to play in XP , or are really bored, :), I
have just uploaded the prototype of the Master6 Pulseing engine for XP.
I haven't yet got it working under ME or 98SE, and I don't know if it
will run in Win2000 ( it should), but I'd appreciate any feedback on the
numbers displayed on the test screen.
Install instructions are included in the file. It is a Device Driver
and installed just like any hardware. It can be deleted from the
ControlPanel under System/Hardware.
Basically, it just opens a window showing how many pulses per second it
is doing at the moment. ( locked it to 50,000 but its controllable to
100,000 ) and the average latency, max latency and min for both the main
timer and the "WatchDog" timer which is implemented. Since no-one has
run it but me, I have no idea how many machines can run it, or what
CPU's could have a problem, but it was written to eliminate the
pickyness that Master5 can exhibit.
Just install the driver, reboot, and run the test application.
So, If your feeling lucky and would like to see how your fast your
windows can pulse....I'd really appreciate any feedback.
Thanks,
Art (URL for file is below..Timer50000.zip)
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Timer50000.zip
Master5 Software
http://users.andara.com/~fenerty/master.htm
[Non-text portions of this message have been removed]
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Abit motherboard KT7-raid
Windows XP
256 mb ram
370322119 in the Freqency in Hertz box
1243396 in the WatchDog count box
Henk
-----Oorspronkelijk bericht-----
Van: Art Fenerty [mailto:fenerty@...]
Verzonden: vrijdag 4 januari 2002 21:44
Aan: CAD_CAM_EDM_DRO@yahoogroups.com
Onderwerp: [CAD_CAM_EDM_DRO]
Hi All:
For those of you who like to play in XP , or are really bored, :), I
have just uploaded the prototype of the Master6 Pulseing engine for XP.
I haven't yet got it working under ME or 98SE, and I don't know if it
will run in Win2000 ( it should), but I'd appreciate any feedback on the
numbers displayed on the test screen.
Install instructions are included in the file. It is a Device Driver
and installed just like any hardware. It can be deleted from the
ControlPanel under System/Hardware.
Basically, it just opens a window showing how many pulses per second it
is doing at the moment. ( locked it to 50,000 but its controllable to
100,000 ) and the average latency, max latency and min for both the main
timer and the "WatchDog" timer which is implemented. Since no-one has
run it but me, I have no idea how many machines can run it, or what
CPU's could have a problem, but it was written to eliminate the
pickyness that Master5 can exhibit.
Just install the driver, reboot, and run the test application.
So, If your feeling lucky and would like to see how your fast your
windows can pulse....I'd really appreciate any feedback.
Thanks,
Art (URL for file is below..Timer50000.zip)
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Timer50000.zip
Master5 Software
http://users.andara.com/~fenerty/master.htm
[Non-text portions of this message have been removed]
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/