Re: [CAD_CAM_EDM_DRO] Master6 Results

Thanks John:

Yours is the first report that matches mine exactly.
Interesting..
Art
Master5 Software
http://users.andara.com/~fenerty/master.htm

----- Original Message -----
From: "John Beidl" <jbeidl@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 04, 2002 6:40 PM
Subject: Re: [CAD_CAM_EDM_DRO] Master6 Results


> Intel 815 motherboard with 933MHz PIII. Windows XP Pro.
>
> Freq: 49058
> Worst Lat: 36.05
> Low 2.945
> Average: 6.20uS per pulse
>
> John Beidl
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>