RE: [CAD_CAM_EDM_DRO] Stepper driver

I have built stepper drivers with this chip (not much to build just hook it
up)

I found the full spec sheet online at the alltronics website

www.alltronics.com/download/5804.pdf

I also have bought chips there for $4.50 each.
\JB

John Barnwell
barnwell@...
Voice: 978-534-4096
Cell: 978-807-8475

> -----Original Message-----
> From: craigl452000 [mailto:craigl@...]
> Sent: Sunday, January 06, 2002 11:40 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Stepper driver
>
>
> Hi all
> Has anyone used the UCN5804B chip to drive 3 steppers and have a
> pin out of it. Iam new to all this. I would like to make a cnc
> mill to cut foam and make a mold to cast from.
>
> TIA
> Craig
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>