Re: [CAD_CAM_EDM_DRO] Re: New Member w/couple of questions

Jerry,

I bought mine from Mcmaster Carr and they work great.

Bob Campbell

----- Original Message -----
From: "waynegramlich" <Yahoo@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, January 06, 2002 9:14 PM
Subject: [CAD_CAM_EDM_DRO] Re: New Member w/couple of questions


> Jerry:
>
> The shaft coupler that I used to connect the stepper
> motors to the lead screws on my Sherline tends to work
> loose in fairly short order. Needless to say, this
> causes some serious problems with backlash. I need
> to find a more robost shaft coupler or see whether a
> simple dab of Loctite(tm) will solve the problem.
> First, I have to fix up my electronics though.
>
> -Wayne
>
> --- In CAD_CAM_EDM_DRO@y..., "Carol & Jerry Jankura"
> <jerry.jankura@s...> wrote:
> > Wayne:
> >
> > Would you comment on how you plan to change the mechanics?
> >
> > -- Jerry
> >
> > |
> > |I have an old Sherline that was purchased from Sears back
> > |in the late 70's. I have converted it to CNC once, but
> > |I am not very happy with the result and intend to redo
> > |the electronics and some of the mechanics.
> > |
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>