Re: [CAD_CAM_EDM_DRO] cnc pro "skipping" blocks

Hi, running Desknc was using g81 canned drill,drilled last hole,used g80 to
cancel g81. It drilled last hole leaving z down,read the next line g00 to
x0,y0 and went for zero with z still down. i put a g00 z0 after g80 and that
solved the problem. Maybe my problem was simular to yours? Maybe i didnt end
the g81 cycle properly? cul brian f.

----- Original Message -----
From: "carlcnc" <carlcnc@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, January 23, 2002 10:53 PM
Subject: [CAD_CAM_EDM_DRO] cnc pro "skipping" blocks


> Hi Guys
> Anyone have an occasional hiccup with cncpro where it blows right
> by a line of code? It has happened to me several times[remember the
> old thread about dos and math errors?]
> I had a talk with another guy today who experiences same thing.When
> it happens it is always the at same line. Usually the last Z up
> command at end of program!
> Happened to me the other day so I played with all the likely suspects
> in cfg file,feed speeds,accel, etc. Nothing helped.
> Finally I put another [redundant] line of code just before the
> problem line and voila! File ran several times no problem.
>
> Carl
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>