CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Lots of Parts

Posted by RachelBarker
on 2002-01-31 14:41:02 UTC
Hello again John.

The motos are 20.00 each without encoder and 27.50 with. This is dirt
cheap!!!

Regards,

Colin.
----- Original Message -----
From: "John Heritage-UK" <johnhe-uk@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, January 29, 2002 11:15 PM
Subject: Re: [CAD_CAM_EDM_DRO] Lots of Parts


> > Frame size 23, 2 stack steppers ( 1 nm) made by Sanyo. QTY- I've lots.
> 20.00 each (No. 37)
>
> To all us none SI guys that's 1Nm = 141.5 oz/in. : )
> Could I see number 37 please? Are you selling anything else?
>
> John H.
>
> johnhe-uk@...
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

RachelBarker 2002-01-29 14:59:55 UTC Lots of Parts John Heritage-UK 2002-01-29 15:14:50 UTC Re: [CAD_CAM_EDM_DRO] Lots of Parts RachelBarker 2002-01-31 14:41:02 UTC Re: [CAD_CAM_EDM_DRO] Lots of Parts John Heritage-UK 2002-01-31 17:35:31 UTC Re: [CAD_CAM_EDM_DRO] Lots of Parts RachelBarker 2002-02-05 12:07:56 UTC Re: [CAD_CAM_EDM_DRO] Lots of Parts