Re: [CAD_CAM_EDM_DRO] Controlling VFDs from your PC?
Posted by
Doug Fortune
on 2002-02-09 16:40:12 UTC
audiomaker2000 wrote:
following:
- analog 0 to 5V
- analog 0 to 10V
- analog -10 to +10V
- digital (serial) control
You could even attach a stepper motor to the potentiometer
if you wanted to be different!
Doug Fortune
http://www.cncKITS.com
>Depends on the VFD, but they might take any of the
> Hi again!
>
> Could someone give me a quick rundown on how spindle speeds are
> controlled from your PC via VFD or Spindle drive?
> What are the components and what sort of signals are used
> (step/direction?).
> I'm getting ahead of myself in this Bridgeport conversion, but down
> the road it would be nice to have the spindle motor under PC control.
following:
- analog 0 to 5V
- analog 0 to 10V
- analog -10 to +10V
- digital (serial) control
You could even attach a stepper motor to the potentiometer
if you wanted to be different!
Doug Fortune
http://www.cncKITS.com
Discussion Thread
audiomaker2000
2002-02-09 16:22:27 UTC
Controlling VFDs from your PC?
Doug Fortune
2002-02-09 16:40:12 UTC
Re: [CAD_CAM_EDM_DRO] Controlling VFDs from your PC?
Jon Elson
2002-02-09 20:29:16 UTC
Re: [CAD_CAM_EDM_DRO] Controlling VFDs from your PC?
audiomaker2000
2002-02-09 21:25:00 UTC
Re: Controlling VFDs from your PC?
Doug Fortune
2002-02-09 21:49:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Controlling VFDs from your PC?
Jon Elson
2002-02-09 23:06:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Controlling VFDs from your PC?
stevenson_engineers
2002-02-10 02:04:56 UTC
Re: Controlling VFDs from your PC?
dave_ace_me
2002-02-10 06:29:37 UTC
Re: Controlling VFDs from your PC?
Peter
2002-02-10 06:30:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Controlling VFDs from your PC?
doug98105
2002-02-10 07:52:41 UTC
Re: Controlling VFDs from your PC?
Bill Vance
2002-02-10 10:50:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Controlling VFDs from your PC?
Brian Pitt
2002-02-10 13:29:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Controlling VFDs from your PC?
ptengin@a...
2002-02-10 13:49:55 UTC
[CAD_CAM_EDM_DRO] Re: Controlling VFDs from your PC?
Tony Jeffree
2002-02-10 20:57:23 UTC
Re: Controlling VFDs from your PC?
Brian Pitt
2002-02-10 21:55:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Controlling VFDs from your PC?
Sven Peter
2002-02-11 04:26:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Controlling VFDs from your PC?