Re: [CAD_CAM_EDM_DRO] Small CNC router

John,

My web page has a bill of material for a 2 by 3 cnc router. You may want to
download it and see what materials I use to make my cnc routers.

Bob Campbell
www.campbelldesigns.com

----- Original Message -----
From: "petpatter" <rcav8r@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, February 22, 2002 8:42 PM
Subject: [CAD_CAM_EDM_DRO] Small CNC router


> Hi all, just joined this group...
>
> I purchased the Hobby CNC kit from Dave Rigotti, but I'm not satisfied
> with the size limitations of the table plans. I'd like to be able to
> cut up to 12"x48" wood sheets.
>
> My problem is I know nothing about the various extruded aluminum
> pieces, etc. that a lot of folks seem to make their units out of. How
> do I know what parts fit in what, what bearings and leadscrews will
> fit, etc.
>
> I need an education on these parts. It seems to me I could design my
> own table easily enough, if I just knew what preformed parts are out
> there.
>
> Or I can also make my own parts, being a machinist.
>
> Any leads, websites, reading, catalogs that have very good
> descriptions of their products, etc?
>
> John
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>