Re: [CAD_CAM_EDM_DRO] Re: bridgeport steppers rated phase current

My Series I CNC has a cover plate over the ends of the motor- no motor
I.D., inside the plate, it says: P/N 025805 This is alternate motor for
026744, and a schematic of the windings vs wire colors, and the note about
reversing direction vs terminals # 1 & 3.
I have the complete ($465.00 worth) set of 4 manuals for the Series I, and
don't ever recall a model #. Dwg # 104215, (typical) AXIS DRIVE SYSTEM
only notes the SIGMA, and SUPERIOR motors, and the wiring diagram in the
inside of the motorplate suggests that it is the SUPERIOR. You can contact
me off-list if you need a "facsimile" (not a FAX, so I don't violate any
copyright laws) of any of the pages.

RayHex jnr@...

----------

> From: JanRwl@...
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Re: bridgeport steppers rated phase

current

> Date: Thursday, February 28, 2002 8:05 PM
>
> In a message dated 28-Feb-02 17:30:07 Central Standard Time,
> ja_erickson@... writes:
>
>
> > i have looked all over the drawings for this machine and have not
> > been able to find any numbers at all. do you know where if the motors
> > themselves are marked anywhere ?
>
>
> I saw some of these machines in a small shop some years back, and all the

> motors were Superior Electric Corp. steppers (size 42, with finned

cast-iron

> housing), with the "usual" S.E. labels on the "rear ends" of the motors,

in

> plain sight! If YOUR motors do not have OBVIOUS labels, they have either

> been removed (and) or painted-over. Look for something like

"MO-72-whatever"

>
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> http://www.metalworking.com/news_servers.html
> http://www.metalworking.com/news_servers.html
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

>