CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Make your own linear scales

on 2002-03-01 18:19:35 UTC
At 12:52 AM 3/2/02 +0000, you wrote:

>Pick up the received signal from the microphone and compare it
>against the transmitted signal. At 40kHz, the wave-lenght is
>about .025".

Hi, Mariss,

I've been working on some (unrelated) sonar stuff recently. You're
off by about 10:1 there, wavelength is more like 0.025 *foot*
(about 1/3").

Neat concept, though.

Best regards,

Spehro Pefhany --"it's the network..." "The Journey is the reward"
speff@... Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
9/11 United we Stand

Discussion Thread

beer@s... 2002-03-01 15:26:46 UTC Re: Make your own linear scales mariss92705 2002-03-01 16:52:41 UTC Re: Make your own linear scales Carlos Guillermo 2002-03-01 17:20:33 UTC RE: [CAD_CAM_EDM_DRO] Re: Make your own linear scales Spehro Pefhany 2002-03-01 18:19:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Make your own linear scales mariss92705 2002-03-01 18:23:02 UTC Re: Make your own linear scales Bill Vance 2002-03-01 18:38:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Make your own linear scales Matt Shaver 2002-03-01 21:32:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Make your own linear scales