CAD CAM EDM DRO - Yahoo Group Archive

Re: Make your own linear scales

Posted by mariss92705
on 2002-03-01 18:23:02 UTC
You are right, 12 times over!

Mariss

--- In CAD_CAM_EDM_DRO@y..., Spehro Pefhany <speff@i...> wrote:
> At 12:52 AM 3/2/02 +0000, you wrote:
>
> >Pick up the received signal from the microphone and compare it
> >against the transmitted signal. At 40kHz, the wave-lenght is
> >about .025".
>
> Hi, Mariss,
>
> I've been working on some (unrelated) sonar stuff recently. You're
> off by about 10:1 there, wavelength is more like 0.025 *foot*
> (about 1/3").
>
> Neat concept, though.
>
> Best regards,
>
> Spehro Pefhany --"it's the network..." "The Journey is
the reward"
> speff@i... Info for manufacturers: http://www.trexon.com
> Embedded software/hardware/analog Info for designers:
http://www.speff.com
> 9/11 United we Stand

Discussion Thread

beer@s... 2002-03-01 15:26:46 UTC Re: Make your own linear scales mariss92705 2002-03-01 16:52:41 UTC Re: Make your own linear scales Carlos Guillermo 2002-03-01 17:20:33 UTC RE: [CAD_CAM_EDM_DRO] Re: Make your own linear scales Spehro Pefhany 2002-03-01 18:19:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Make your own linear scales mariss92705 2002-03-01 18:23:02 UTC Re: Make your own linear scales Bill Vance 2002-03-01 18:38:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Make your own linear scales Matt Shaver 2002-03-01 21:32:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Make your own linear scales