Re: Re: Raw Plastics for injection molding

I have built the same one. Linsay sells the book for $15.95 as I recall. It
ISBN is1-878087-19-3 The title is Secrets of Building a Plaastic Injection
Moulding machine by Vince Gingery
Its a very good book. I too built one last year and it works very well.
Vince also has a Vacuum forming machine book. I am building one of those
also but my bad back has pu that on hold.
Dan
-----Original Message-----
From: MIADsgns@... <MIADsgns@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Sunday, December 05, 1999 5:28 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Raw Plastics for injection molding

>From: MIADsgns@...
>
>My Injection Molding machine is a modified design from one I found through
>the Linsay publications.
>
>Simply put, it is a hand operated plunger type injector made from CRS 2"x2"
>by 4" block with a stick type 400w heating element inserted in the block,

an

>oven thermometer screwed to the injector front face for temp reading and a
>thermostat for control. It works great with recycled plastic from 35 mm

film

>canisters. Melting point at 400 Deg F.
>
>Mario
>
>>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>