Re: [CAD_CAM_EDM_DRO] stick slip blues
Posted by
andrew abken
on 2002-03-27 06:29:29 UTC
Thanks jon,
I started to check for junk up under the axis slide and found that the oil
delivery to one side of the saddle was stopped up. Once I oiled the way on
that side things stated to slide just fine. I dont notice the problem at all
now. I will keep an eye on that in the future. I assumed if one side had oil
comming out the other would to, but not true.
thanks for the help,
andrew
_________________________________________________________________
Join the world�s largest e-mail service with MSN Hotmail.
http://www.hotmail.com
I started to check for junk up under the axis slide and found that the oil
delivery to one side of the saddle was stopped up. Once I oiled the way on
that side things stated to slide just fine. I dont notice the problem at all
now. I will keep an eye on that in the future. I assumed if one side had oil
comming out the other would to, but not true.
thanks for the help,
andrew
_________________________________________________________________
Join the world�s largest e-mail service with MSN Hotmail.
http://www.hotmail.com
Discussion Thread
andrew abken
2002-03-26 14:26:38 UTC
stick slip blues
Jon Elson
2002-03-26 22:36:45 UTC
Re: [CAD_CAM_EDM_DRO] stick slip blues
andrew abken
2002-03-27 06:29:29 UTC
Re: [CAD_CAM_EDM_DRO] stick slip blues
Jon Elson
2002-03-27 10:31:02 UTC
Re: [CAD_CAM_EDM_DRO] stick slip blues