Re: [CAD_CAM_EDM_DRO] Re: another Vexta stepper question.....

First of all, thanks for all your help! The "C" series Vexta stepper I was
asking about, is double shafted, 4 volts @ 1.1 amps if that helps.

Russ

----- Original Message -----
From: n4onl <umrk@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, April 01, 2002 5:51 PM
Subject: [CAD_CAM_EDM_DRO] Re: another Vexta stepper question.....


> --- In CAD_CAM_EDM_DRO@y..., "RC" <asdf@c...> wrote:
> > Vexta stepper Mod. c518-9212, need to know the oz. per inch holding
> torque.
> >
> > Thanks,
> > Russ
>
> I think the C series are custom made ones for OEM use. Custom shaft
> dimentions, flats, ect. I usually find a standard model that the
> motor is close to (physically) and estimate from there using the spec
> sheets I have and the info online. Ohm the windings, and or use the
> Volt and Amp specs if listed, this should put you in the ballpark for
> motors of the same size. Not very scientific but I've found no better
> way to do it. Maybe someone else can shead some light on this.
>
> mike
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same memembers are there, for
OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>