Re: new to the hobby
Posted by
wayne_j_hill
on 2002-04-06 13:23:04 UTC
Marios,
I recommend a P5 intel processor or higher PC and GeckoDrives for
your stepper or servo system.
http://www.geckodrive.com/
You can always add another drive for a mill.
Camtronics has a nice box and connectors for mounting Gecko drives.
This would make it easy to switch between the two machines using the
same drive system.
http://www.seanet.com/~dmauch/
Wayne
I recommend a P5 intel processor or higher PC and GeckoDrives for
your stepper or servo system.
http://www.geckodrive.com/
You can always add another drive for a mill.
Camtronics has a nice box and connectors for mounting Gecko drives.
This would make it easy to switch between the two machines using the
same drive system.
http://www.seanet.com/~dmauch/
Wayne
--- In CAD_CAM_EDM_DRO@y..., "mlpapus1" <mlpapus1@h...> wrote:
> Hello there
> i am new to the hobby and i will like some advice on cnc mini lathe
> I have a Sherline 4000 cnc ready lathe ,and have a radio shock old
> computer and controller.
> I like to get a newer controller (2 axis x & z )or (3 axis x y z )
> My question is what is the chip way to go ?? and if i get 3 axis
can i
> use it on a lathe and mill if i need to ????
> Thanks for the help
> Marios
Discussion Thread
mlpapus1
2002-04-06 12:54:35 UTC
new to the hobby
wayne_j_hill
2002-04-06 13:23:04 UTC
Re: new to the hobby