Re: 2 Axis Motion at Last, P machine INI FILE !!! HELP!!!

Thanks a lot of Paul, for your advice and help.
Now I understand better Tips & Tricks of Freqmod.
I will try your suggestion asap.
Paul could you post the ini file in order to I have the thread
completed.

TIA

--- In CAD_CAM_EDM_DRO@y..., Paul <Paul.Corner@t...> wrote:
> After running several simulations on this machine, the best
settings I
> acheived with freqmod was :-
>
> PERIOD = 0.000014
>
> [AXIS_0]
> MAX_VELOCITY = 10
> INPUT_SCALE = 80 0
> OUTPUT_SCALE = 80 0
>
> This is on a Duron 800Mz running the current CVS version of EMC
with linux
> 2.4.16 and rtai. Odd though - Using an ini file set up for imperial
units, I
> can get 180 ipm or 4500 mm per min in simulations, and changing
yours, I get
> 600ipm.
>
> Conclusion - Set your ini file up as if it were an imperail
machine, and
> force EMC to start up displaying mm and G21 active by default.
>
> Regards, Paul.
>
> P.S. If you need it, I can send you the ini file I used.
>
>
>
> On Friday 05 April 2002 11:44, ajv2803959 wrote:
> > Yesterday night, I was trying set period parameter in increments
from
> > 0.000020 until 0.000016
> > OK in 0.000020 interfaz and mouse run slowly but velocity don´t
> > improve.
> > In 0.000016 velocity don´t improve
> > In 0.000017 and 0.00016 system crash or reboot in Pentium 233 and
> > velocity don´t improve in Pentium 333