Re: [CAD_CAM_EDM_DRO] Computer tech help needed

I assume that it is an ATX style motherboard.

You will need a momentary contact switch and leads with connectors to plug
into the motherboard. You will need a second switch for the reset signal to
the motherboard.

The motherboard will have connections for a power led and a hard drive
activity led.

Best bet, find somebody with some old AT cases and strip the parts from
them.

Guard the motherbook, without it or web access it's hard to setup a
motherboard esp. two or three years later.<GRIN>

Hugh
Sold Altair 8800 to Pentium IV computers, all were obsolete the day we sold
them.

----- Original Message -----
From: "Bruce Klawiter" <bruce@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, April 11, 2002 3:37 PM
Subject: [CAD_CAM_EDM_DRO] Computer tech help needed


> I just purchased an MS-5169 motherboard with 500 MHz processor for my CNC
conversion I have a switching power supply and NO case, as this will be
mounted in an old controller box without the case.
> The problem is I don't know how to turn this thing on without the switch
from the case, which I never had.
> I am hoping I can use the power switch on the old controller box to fire
everything up.
> Any help I can get will be greatly appreciated.
>
> Bruce Klawiter
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same memembers are there, for
OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>