The Servos from H**L...

Ok guys, I got this nifty idea to retrofit my 1985 Deckel FP2NC,
which is a 3 axis vertical mill made in Germany. The drives are
Bosch and it's a pretty neat machine except the control is having
some serious problems.
Ok, no big deal, a little help from Art and Mariss and I'll have
this puppy howling along....

Sooo, I crawl back to get the Servo spec's and am met with this on
the nameplate:

SEIMENS
=PermMagn-Mot 1 HU3071-0/AC01-0ZZ9-Z
IEC 71 NrE 9666 8208 33 011
V 1/min A Kw
176 2000 7.6 1.09
Mo 5Mn lo 7.1A VDE 0530 I CL F 100K
Err/excit V A <diode symbol> Lv mH
Permanent IP54 Bauf BS
Mo Max 5.5Nm lo max 7.8A LCL F 130
= Tacho 1 HUM052 20mVmin Load 13 <ohm>
Z G45 Made in Germany

Best guess is that it's:
176V, 2000RPM, 7.6 amp and 1.09KW (1.5HP)

I'm now feeling a bit like the captain of "Das Boat"

Believe it or not, three of these live on the machine and the
machine itself is smaller in frame size than a standard Brideport
mill.

Can this moster be retrofitted to PC control?

Thoughts?

Sean