CAD CAM EDM DRO - Yahoo Group Archive

Re: any software board combination that includes threading options?

on 2002-05-09 11:09:09 UTC
--- In CAD_CAM_EDM_DRO@y..., scott wilson <swilson@d...> wrote:
> Does anybody know of a software/hardware combination that includes
inputs for index/encoder on spindle motor so you can do threading?

Hi Scott,

At the present time EMC does not support
threading as you probably already knew.

AHHA does have threading in their Artisan
system if you order the option on the
interface board.

See: http://www.ahha.com/

Also, TurboCNC has begun to have some support
for threading. It is still only using one
index pulse per spindle revolution for now
but impovements are expected. TurboCNC runs
steppers via the printer port.

See: http://www.dakeng.com/

Cheers,
Steve Stallings
www.pmdx.com

Discussion Thread

scott wilson 2002-05-09 10:53:05 UTC any software board combination that includes threading options? stephen_stallings 2002-05-09 11:09:09 UTC Re: any software board combination that includes threading options? Tim Goldstein 2002-05-09 11:19:16 UTC Re: [CAD_CAM_EDM_DRO] any software board combination that includes threading options? Alan Marconett KM6VV 2002-05-09 13:28:49 UTC any software board combination that includes threading options?