Re: [CAD_CAM_EDM_DRO] RS232C, What am I looking for?
Posted by
John
on 2002-05-12 18:48:26 UTC
Is the DIN whatever part of this, the type of connector that the RS232C
terminates in? The connector on the control is a big blue job with no metal
on it. Looks a lot like a far parallel port. He he he, you know I found a
sewing machine that uses a null modem to download stitch pattern into it?
That's one funky sewing machine.
John H.
you have trouble.
subjects, that are not allowed on the CCED list.
terminates in? The connector on the control is a big blue job with no metal
on it. Looks a lot like a far parallel port. He he he, you know I found a
sewing machine that uses a null modem to download stitch pattern into it?
That's one funky sewing machine.
John H.
> you will want a nullmodem or crossover conection between the portsconnect
> the pinouts from http://www.nullmodem.com/
>
> control PC
> rxd txd
> txd rxd
> sg sg
> rts cts
> cts rts
> dsr dtr
> cd dtr
> dtr dsr
> dtr cd
>
> you can get nullmodem cables or adapters at any computer shop
>
> Brian
>
>
> On Sunday 12 May 2002 14:29, you wrote:
> > Hello,
> >
> > I have the pinout for my lathes controller board; they are pretty
> > detailed. I was told that to make a suitable RS232C to serial connection
> > (So I can plug it into my PC) I need to find the correct pins etc. What
> > should I look for on these pinouts to tell me which pins I need to
> > to what?aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> >
> > Thanks,
> >
> > John Heritage
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
you have trouble.
> http://www.metalworking.com/news_servers.htmlsister site to the CCED group, as many of the same members are there, for OT
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
John
2002-05-12 14:30:51 UTC
RS232C, What am I looking for?
Brian Pitt
2002-05-12 15:02:59 UTC
Re: [CAD_CAM_EDM_DRO] RS232C, What am I looking for?
John
2002-05-12 18:48:26 UTC
Re: [CAD_CAM_EDM_DRO] RS232C, What am I looking for?