Re: retrofiting a max nc help

Thanks for the leads. As far as money, time is money to me so $
spent within reason can be a godsend, rather than trying to learn
yet another thing. How to build a control unit. Id rather chose to
seek the talant that already exists. And spend my time making chips,
fun stuff for me.:) I will check these leads out and probably post
more ?

Chuck
www.cscinnovations.com

--- In CAD_CAM_EDM_DRO@y..., "John" <johnhe-uk@s...> wrote:
> Flashcut sell ready made controllers. If you have the cash so do
AHHA!
> You'll pay more the less you want to do, as is the way of life.
You pay $$$,
> or £££ in my case, for someone else to make the out the box option
for you.
> Both have web sites, a quick search on google should find them. I
doubt
> you'd need an AHHA on a MaxNC though.
>
> Regards,
> John H.
>
>
> > It is the servo system with encoders.
> > Gekos are just the drive correct? What about a ready to go
control
> > box? Does any body make one that will work for my system. Less I
> > have to the better.
> >
> >
> >
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> > > zoomer199 wrote:
> > >
> > > > Has anybody out there changed there control box over to
something
> > > > else.
> > > > I am having problems with my max 15 closed loop control. Max
has
> > > > been less than helpful in the past so switching to something
else
> > > > might be the better move.
> > >
> > > Is this a stepper system with encoders, or a servo system?
Either
> > > way, gecko drives has drivers that are highly regarded. If you
> > want
> > > encoder feedback to the PC (which you'd need if it is a stepper
> > system)
> > > then you can get something like Dan Mauch's DRO card.
> > >
> > > For encoder feedback to the PC, EMC and DeskNCRT are most of
the
> > > programs that have that feature.
> > >
> > > Jon
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
as a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >