Controler pics

I finished wiring my first controller/PC. I uploaded some pictures to
the photos section in the folder "Jay C." I've powered up and tested
the power supply and PC. I've done the preliminary power up and tests
on the break out board short of powering up the Geckos. I must admit
I was a wee bit apprehensive when I plugged in the power supply the
first time having never done anything like this before. No smoke and
everything checks out so, so far so good. I still need to load the
control software and make up some temp leads to the step motors
before I power up the geckos. Let me know what you think, especially
if you think something is grossly amiss.

Now on to building the machine!

Jay