CAD CAM EDM DRO - Yahoo Group Archive

Re: Controler pics

Posted by aljones95
on 2002-06-01 16:56:13 UTC
--- In CAD_CAM_EDM_DRO@y..., "jbolt001" <js3mc@a...> wrote:
> I finished wiring my first controller/PC. I uploaded some pictures
to
> the photos section in the folder "Jay C." I've powered up and
tested
> the power supply and PC. I've done the preliminary power up and
tests
> on the break out board short of powering up the Geckos. I must
admit
> I was a wee bit apprehensive when I plugged in the power supply the
> first time having never done anything like this before. No smoke
and
> everything checks out so, so far so good. I still need to load the
> control software and make up some temp leads to the step motors
> before I power up the geckos. Let me know what you think,
especially
> if you think something is grossly amiss.
>
> Now on to building the machine!
>
> Jay

Discussion Thread

jbolt001 2002-06-01 00:41:56 UTC Controler pics aljones95 2002-06-01 16:56:13 UTC Re: Controler pics