[CAD_CAM_EDM_DRO] Re: heavy CNC lathe retrofit
Posted by
Doug Harrison
on 2002-06-09 08:56:34 UTC
If your drives and motors are still good but you want the simplicity of
step/direction software then you can use S/D to +/-10V converters from
www.rutex.com
These are only $73 each and include full PID filtering. The part number is
R997. A differential receiver is also available (R515) at $19. I haven't
used either of these. Another list member bought some of their amps and was
happy with them.
Doug
step/direction software then you can use S/D to +/-10V converters from
www.rutex.com
These are only $73 each and include full PID filtering. The part number is
R997. A differential receiver is also available (R515) at $19. I haven't
used either of these. Another list member bought some of their amps and was
happy with them.
Doug
Discussion Thread
av1a
2002-06-08 22:10:30 UTC
heavy CNC lathe retrofit
Doug Fortune
2002-06-08 23:02:05 UTC
Re: [CAD_CAM_EDM_DRO] heavy CNC lathe retrofit
Jon Elson
2002-06-08 23:37:54 UTC
Re: [CAD_CAM_EDM_DRO] heavy CNC lathe retrofit
Ray Henry
2002-06-09 08:15:38 UTC
Re: heavy CNC lathe retrofit
Doug Harrison
2002-06-09 08:56:34 UTC
[CAD_CAM_EDM_DRO] Re: heavy CNC lathe retrofit