RE: [CAD_CAM_EDM_DRO] Router - Belt or Ballscrews
Posted by
Bob Campbell
on 2002-06-13 16:13:09 UTC
Rab,
The parts that I use are the Hiwin rails on Aluminum extrusions. For screws,
I use BS&A screws.
The Hiwin rails are almost half the price of THK or IKO rails and bearings.
Bob Campbell
-----Original Message-----
From: rainnea [mailto:rainnea@...]
Sent: Thursday, June 13, 2002 4:05 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Router - Belt or Ballscrews
There seems to be a good many off the shelf linear-actuators, the
majority of which are offered with either belt or ballscrews (some
leadscrew and some linear motors too) with a choice of bearings and
assembled on aluminium extrusions that can be bolted together to form
a gantry or moving table router.
Given the large price difference, the belt driven units seem pretty
good, but are they any good for a router ? I don't see commercial
routers using them, but the specs seem ok on paper.
Rab
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
The parts that I use are the Hiwin rails on Aluminum extrusions. For screws,
I use BS&A screws.
The Hiwin rails are almost half the price of THK or IKO rails and bearings.
Bob Campbell
-----Original Message-----
From: rainnea [mailto:rainnea@...]
Sent: Thursday, June 13, 2002 4:05 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Router - Belt or Ballscrews
There seems to be a good many off the shelf linear-actuators, the
majority of which are offered with either belt or ballscrews (some
leadscrew and some linear motors too) with a choice of bearings and
assembled on aluminium extrusions that can be bolted together to form
a gantry or moving table router.
Given the large price difference, the belt driven units seem pretty
good, but are they any good for a router ? I don't see commercial
routers using them, but the specs seem ok on paper.
Rab
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
rainnea
2002-06-13 16:04:45 UTC
Router - Belt or Ballscrews
Bob Campbell
2002-06-13 16:13:09 UTC
RE: [CAD_CAM_EDM_DRO] Router - Belt or Ballscrews
turbulatordude
2002-06-13 17:25:24 UTC
Re: driving a Router - Belt or Ballscrews
JanRwl@A...
2002-06-13 20:31:44 UTC
Re: [CAD_CAM_EDM_DRO] Router - Belt or Ballscrews
JanRwl@A...
2002-06-13 20:38:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: driving a Router - Belt or Ballscrews