CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: searching benchtop lathe

Posted by Sven Peter
on 2002-06-27 06:42:04 UTC
Thanks Peter,
That is the only page that allways apears about collets. But never you
get a page with their lathes. I wrote them now an email if they can help
me on.
Sven Peter

Peter Seddon wrote:
>
> Try http://www.schaublin.ch/
>
> Regards Peter
>
> ----- Original Message -----
> From: "Sven Peter" <peteryco@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Wednesday, June 26, 2002 1:52 PM
> Subject: Re: [CAD_CAM_EDM_DRO] Re: searching benchtop lathe
>
> > AJ,Thank you very much for the reply.
> > I just looked them up in the MSC catalogue and get the feeling they are
> > just as a toy as the machine a friend got on chrismas 1987. (including
> > it seems the same brand)We passed the whole 25 of december trying to
> > make some bushings for his vintage Victoria that did not get acurate
> > measurements.
> > So later he got them made on a real lathe.
> > I will keep on looking.
> > Thank you
> > Sven Peter
> >
> > ajr1973 wrote:
> > >
> > > Sven,
> > >
> > > Have you looked at a Prazi? They are check/german made and are
> > > precision right from the box. I dont have any web addresses on hand
> > > that have them, so I will look it up for you and get back later.
> > >
> > > regards,
> > >
> > > AJ
> > >
> > > --- In CAD_CAM_EDM_DRO@y..., Sven Peter <peteryco@r...> wrote:
> > > > Dear friends,
> > > > I am looking for a small relatively light but precise and sturdy
> > > > benchtop lathe.
> > > > CNC is not necesary but would be nice to find a used one with laptop
> > > > control.
> > > > The idea is to mount it in a truck, so most possible it will be
> > > better
> > > > to get a conventional one.
> > > > Then it is necesarry to have full Norton box with metric and inch
> > > > treading. I don't think at all to get me a hobby unit where I must
> > > > change gears each time I need to thread or change advances.
> > > > Best would be a small tool room lathe that may be used.
> > > >
> > > > Dimentions I am thinking of:
> > > > max diameter to turn 7" 175mm
> > > > distance between centers 20" 500mm
> > > > speed 50-2000 rev
> > > > weight up to 280 KG
> > > >
> > > > Brands like Emco or Chineese I dont take into account because the
> > > poor
> > > > performance I have observed.
> > > > Brands like Hardinge, Schaeublin, Leinen, Traub, Boehler... would be
> > > the
> > > > most appreciated. But I didn't find any appropriated machine yet. (I
> > > > didn't even find the Schaeublin Internet page although I searche for
> > > > hours.)
> > > >
> > > > For a very good machine I am willing to pay up to 2 or 3000$, but
> > > that
> > > > must be perfect.
> > > >
> > > > I do appreciate every sugestions or offers.
> > > > Thank you very much
> > > >
> > > > Sven Peter
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
> > >
> > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: jmelson@... timg@... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

Sven Peter 2002-06-04 06:49:25 UTC [CAD_CAM_EDM_DRO] searching benchtop lathe ajr1973 2002-06-26 05:16:51 UTC Re: searching benchtop lathe Sven Peter 2002-06-26 06:51:37 UTC Re: [CAD_CAM_EDM_DRO] Re: searching benchtop lathe Peter Seddon 2002-06-26 08:05:41 UTC Re: [CAD_CAM_EDM_DRO] Re: searching benchtop lathe ajr1973 2002-06-26 22:00:54 UTC Re: searching benchtop lathe Sven Peter 2002-06-27 06:42:04 UTC Re: [CAD_CAM_EDM_DRO] Re: searching benchtop lathe Sven Peter 2002-06-27 07:35:58 UTC Re: [CAD_CAM_EDM_DRO] Re: searching benchtop lathe wanliker@a... 2002-06-27 07:54:11 UTC Re: [CAD_CAM_EDM_DRO] Re: searching benchtop lathe