I am loosing one step. weir!
Posted by
luisguillermo98
on 2002-06-27 14:30:49 UTC
After running the geckos and turbocnc for sometime I realized that
when doing repetitive movement like:
x1
x0
x1
x0
x1
x0
x1
x0
I noticed one or two step are lost. I have tried different speed from
1 IPM to 30 IPM and I am getting the same result. if I let some time
between move it works fine. If you jog the axis at any speed it works
great but if you try the same move (back and forth) without letting
any time betweeen it will loose step. Does anybody has any suggestion?
when doing repetitive movement like:
x1
x0
x1
x0
x1
x0
x1
x0
I noticed one or two step are lost. I have tried different speed from
1 IPM to 30 IPM and I am getting the same result. if I let some time
between move it works fine. If you jog the axis at any speed it works
great but if you try the same move (back and forth) without letting
any time betweeen it will loose step. Does anybody has any suggestion?