RE: [CAD_CAM_EDM_DRO] Accuracy
Posted by
Larry Ragan
on 2002-07-02 10:49:36 UTC
Jason I have just converted my enco mill that had an anilam control that
used glass scales to use the gecko 340. The system used anilam linear
scales and I get 2540 steps per inch of resolution. .0004" . It would be
possible to get greater resolution with rotary encoders but then you have
backlash to contend with. There is some hunting on the handles when the
table stops but I have not been able to determine if there is any movement
of the table. I am still working out the details of this conversion. The
2540 steps come from the .02mm grating on the anilam scales whick gives 1270
lines per inch and with the ab output giving 2 pulses per line I get 2540
counts or steps per inch.
Regards
Larry Ragan
-----Original Message-----
From: Jason Cox [mailto:sinergy@...]
Sent: Thursday, June 27, 2002 3:11 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Accuracy
Hello,
Just wondering what exactly determines the final accuracy of a cnc, is it a
combination of the leadscrews and driving motors?
Also can a gecko servo drive be used with a glass scale instead of a rotary
encoder and would this give greater accuracy?
Thanks!
Jason Cox
[Non-text portions of this message have been removed]
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
used glass scales to use the gecko 340. The system used anilam linear
scales and I get 2540 steps per inch of resolution. .0004" . It would be
possible to get greater resolution with rotary encoders but then you have
backlash to contend with. There is some hunting on the handles when the
table stops but I have not been able to determine if there is any movement
of the table. I am still working out the details of this conversion. The
2540 steps come from the .02mm grating on the anilam scales whick gives 1270
lines per inch and with the ab output giving 2 pulses per line I get 2540
counts or steps per inch.
Regards
Larry Ragan
-----Original Message-----
From: Jason Cox [mailto:sinergy@...]
Sent: Thursday, June 27, 2002 3:11 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Accuracy
Hello,
Just wondering what exactly determines the final accuracy of a cnc, is it a
combination of the leadscrews and driving motors?
Also can a gecko servo drive be used with a glass scale instead of a rotary
encoder and would this give greater accuracy?
Thanks!
Jason Cox
[Non-text portions of this message have been removed]
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Jason Cox
2002-06-27 02:10:00 UTC
Accuracy
ballendo
2002-06-27 05:01:07 UTC
Re: Accuracy
Jon Elson
2002-06-27 09:55:59 UTC
Re: [CAD_CAM_EDM_DRO] Accuracy
Larry Ragan
2002-07-02 10:49:36 UTC
RE: [CAD_CAM_EDM_DRO] Accuracy