Re: [CAD_CAM_EDM_DRO] Reduction
Posted by
Shelbyville Design & Signworks
on 2002-07-19 10:05:17 UTC
as a data point,
I run pvc plastics (sintra and the like) at aroun 250 ipm, acrylic at about
300 ipm,
wood at between 50 and 150 ipm (depends on thickness)
Shelbyville Design & Signworks
1309 W. S. 7th Street
Shelbyville, IL 62565
(217)774-4444
visit our website at www.shelbyvilledesign.com
I run pvc plastics (sintra and the like) at aroun 250 ipm, acrylic at about
300 ipm,
wood at between 50 and 150 ipm (depends on thickness)
> I should mention though that I am cutting some plastics at 180 ipm.Erie Patsellis
>
> Les
Shelbyville Design & Signworks
1309 W. S. 7th Street
Shelbyville, IL 62565
(217)774-4444
visit our website at www.shelbyvilledesign.com
Discussion Thread
jbordens
2002-07-19 08:57:27 UTC
Reduction
Jon Elson
2002-07-19 09:04:11 UTC
Re: [CAD_CAM_EDM_DRO] Reduction
Les Watts
2002-07-19 09:27:49 UTC
Re: [CAD_CAM_EDM_DRO] Reduction
Shelbyville Design & Signworks
2002-07-19 10:05:17 UTC
Re: [CAD_CAM_EDM_DRO] Reduction
jbordens
2002-07-19 10:16:00 UTC
Re: Reduction
Jon Elson
2002-07-19 22:50:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Reduction
jbordens
2002-07-20 06:24:52 UTC
Re: Reduction
Jon Elson
2002-07-20 19:42:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Reduction