Re: Update: 0 - 10VDC to 4 - 20 mA conversion

>
> Unfortunately my direction problem won't be quite as
> simple. The control has a "spindle on" relay and then a
> separate "reverse" relay.... I'll have to change that to
> two distinct contact... FWD and REVERSE. With luck I'll
> have some spare contacts with which to accomplish this.
> If not I'll twiddle a little. But that is all fairly
> easy.
>

Alan - Check you manual some more! My VDF works exactly this way.
One contact turns on the drive and another contact determines the
direction. Yours may have the option to do this. Andy