Re: [CAD_CAM_EDM_DRO] Got the mechanical bits done tonight

Starting to look nice John! I like the couplings for the steppers.

John H.

> Got all the mechanical bits on the taig conversion done tonight.
> Only mechanical bit left to do is mount the spindle motor when it
> arrives. I've put some photos up
> http://homepage.ntlworld.com/machines/taig4.jpg
> Shows the Y axis motor and mountings with the limit switches.
> http://homepage.ntlworld.com/machines/taig5.jpg
> Shows the same for the X axis
> http://homepage.ntlworld.com/machines/taig6.jpg
> Shows the same for the Z axis
> http://homepage.ntlworld.com/machines/taig7.jpg
> Shows a general shot of the machine.
>
> I will hope fully make a start on the control box next week.
>
> John S.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.

> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a

sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.

DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>